This kit consists of:
- A USB module allowing the conversion of digital data into an analog signal (audio)
- A pair of self-adhesive electrodes that should be replaced regularly (consumable sold on the site)
- A multifunction cable serving as a link between the module and the self-adhesive electrodes, but also with the acupuncture pen to test digitized homeopathic remedies. It consists of a 3.5 mm stereo plug that must be plugged into the gold plug (headphone output) of the module. The 2 mm angled mono jack plug is to be connected to the acupuncture pen (for the EAV test). And the 2 banana plugs of 2 mm are to be put on the socket of the self-adhesive electrodes.
It allows 2 functions:
- For the frequency medicine software, it allows information to be transmitted no longer in audio form, but in the form of an electrical signal via the 2 self-adhesive electrodes that are glued under the ears on the back of the neck.
- For the homeopathic remedy test (in association with the homeopathy software), connect the USB module, configure it, connect the cable to the module, to the acupuncture pen and to the 2 self-adhesive electrodes that 'we will stick at the wrist. Avoid touching the subject and adjust the sensitivity to best appreciate the visualization of the metering drop. This drop is then rectified if the digitized remedy is submitted via the module on the self-adhesive electrodes on the body. The video at the bottom of the home page shows with the MF1 what to get. The acupuncture pen fulfills the same role if you adjust its sensitivity correctly.
Configuration:
The USB module is recognized as a C-Media sound card. In the Windows configuration part, you will have to reset the main sound card as the default value for both the playback part and the recording part. The C-Media card should therefore not have any green icon attached, neither in the playback part, nor in the recording part. Note that this configuration may change if you plug this sound card back into another USB port. On the software side, you will have to make sure to select the C-Media sound card for the audio output part.
Remark:
The kit does not include frequency medicine software, homeopathy software, or acupuncture pen. They will have to be ordered in addition according to your option. If you do not have the software, but Rife or homeopathic remedy files or the like in digital form, you just need to use your favorite sound player and output the sound to the C-Media card that corresponds to the module. The C-Media card is recognized automatically by Windows, Apple or Linux. However, the software only works on Microsoft Windows or other systems that can emulate Windows.
In case of difficulty of understanding or configuration, please send us your questions by Email or call us.
To order it, go to the section store of the website.